Configuring Cisco Multimode G.SHDSL EFM/ATM in Cisco ISR G2
show controllers shdsl
75
Configuring Cisco Multimode G.SHDSL EFM/ATM in Cisco ISR G2
show controllers shdsl
To display the status of the controller configured for symmetric high bit rate digital subscriber line
(SHDSL) mode, use the
show controllers shdsl
command in privileged EXEC mode.
Cisco EHWIC-4SHDSL-EA,
show controllers shdsl
slot number/subslot number/port number
{
brief
|
detailed
}
Cisco 888EA
show controller shdsl
number
Syntax Description
Command Default
Controller number
Command Modes
Privileged EXEC
Command History
Usage Guidelines
This command is used to display the controller mode, the controller number, and associated statistics.
Examples
Cisco HWIC-4SHDSL, and HWIC-2SHDSL
The following example shows the status of a Cisco HWIC-4SHDSL controller in slot 0, subslot 2, port
0 on a Cisco access router:
brief
Provides a summary of the controller’s status.
detailed
Provides a detailed report of the controller’s status.
number
SHDSL controller number. The valid controller number for SHDSL mode
is 0.
slot number
Slot on the router in which the HWIC is installed.
subslot number
Subslot on the router in which the HWIC is installed.
port number
Port on the router in which the HWIC is installed. By default, the
Cisco HWIC-4SHDSL-E, HWIC-4SHDSL, and HWIC-2SHDSL use port
number 0.
Release
Modification
12.4(15)T
This command was updated for the Cisco HWIC-4SHDSL and
HWIC-2SHDSL running on the Cisco 1841 router and on the Cisco 2800
and 3800 series access routers.
12.2(8)T
This command was introduced on Cisco IAD2420 series.
15.1(1)T
This command was modified. Support for the Cisco HWIC-SHDSL-E was
added.
15.2(2)T
This command was modified to support the Cisco EHWIC-4SHDSL-EA.
