Configuring Cisco Multimode G.SHDSL EFM/ATM in Cisco ISR G2
Troubleshooting Cisco G.SHDSL EFM/ATM
26
Configuring Cisco Multimode G.SHDSL EFM/ATM in Cisco ISR G2
Troubleshooting Cisco G.SHDSL EFM/ATM
To troubleshoot Cisco G.SHDSL EFM/ATM, use the following new and published Cisco IOS
commands. All other Cisco IOS software commands used with G.SHDSL EFM/ATM are documented in
the Cisco IOS Release Release: <optional, example: Cisco IOS Release 15.1(1)T> command reference
publication at Cisco.com:
http://www.cisco.com/en/US/products/ps6441/tsd_products_support_series_home.html
Note
For EHWICs, use the three-tuple notation (
slot number/subslot number/0
). For fixed platforms, use the
single-tuple notation (
slot number
).
SUMMARY STEPS
1.
show controllers shdsl
slot number / subslot number /
0 [
detailed
|
brief
]
2.
show interface ethernet
slot / subslot number /
0 (in EFM mode)
3.
show controllers ethernet
slot / subslot number /
0 (in EFM mode)
4.
show interface atm
slot / subslot number / 0
(in ATM mode)
5.
show controllers atm
slot / subslot number / 0
(in ATM mode)
