Cisco DWDM-XENPAK Series Installation Notes Download

Page: 2 / 24

Cisco 10-Gigabit Ethernet XENPAK Transceiver Modules Installation Note

78-15665-07

Overview

The 10-Gigabit Ethernet XENPAK transceivers are a hot-swappable I/O devices that plug into
10-Gigabit Ethernet module ports. (See

Figure 1

.) The XENPAK transceivers are available in either

optical or copper interfaces.

Figure 1

XENPAK Transceiver

The different types of XENPAK are described in

Table 1

and

Table 2

Captive installation screw

Transmit optical bore

Optical bore dust plug

Receive optical bore

99376

Table 1

XENPAK Transceiver Modules

XENPAK Transceiver
Product Number

Description

XENPAK-10GB-SR=

Cisco 10GBASE-SR XENPAK transceiver module for MMF, 850 nm
wavelength, SC connector

XENPAK-10GB-LR=

Cisco 10GBASE-LR XENPAK transceiver module for SMF, 1310 nm
wavelength, SC connector

XENPAK-10GB-LR+=

Cisco 10GBASE-LR+ XENPAK transceiver module for SMF, 1310 nm
wavelength, SC connector (supports DOM)

XENPAK-10GB-LW=

Cisco 10GBASE-LW XENPAK transceiver module for SMF, 1310 nm
wavelength, SC connector

XENPAK-10GB-ER=

Cisco 10GBASE-ER XENPAK transceiver module for SMF, 1550 nm
wavelength, SC connector

XENPAK-10GB-ER+=

Cisco 10GBASE-ER+ XENPAK transceiver module for SMF, 1550 nm
wavelength, SC connector (supports DOM)

XENPAK-10GB-ZR=

Cisco 10GBASE-ZR XENPAK transceiver module for SMF, 1550 nm
wavelength, SC connector

Summary of Contents for DWDM-XENPAK Series

























Search results

Summary of Contents for DWDM-XENPAK Series

Reviews:

Related manuals for DWDM-XENPAK Series

Brands by name

Popular brands

Cisco DWDM-XENPAK Series, Installation Notes

Search results

Summary of Contents for DWDM-XENPAK Series

Reviews:

Related manuals for DWDM-XENPAK Series

Brands by name

Popular brands