Configure Advanced Settings
4021194 Rev A
57
Setup Advanced Settings - VPN Termination - Status Page Description
This section describes the section headings and field descriptions of the Setup
Advanced Settings - VPN Termination - Status page. This page allows you to create,
configure, and control IPsec VPN tunnels.
Note:
You can set up and mange up to 50 different VPN tunnels.
Field Name
Description
IPsec Endpoint
Enables/disables the IPsec endpoint mode
Name
Displays the user-defined tunnel name entered from the VPN Setup
page
Status
Displays the current connection state (Connected/NOT Connected)
Control
Displays one of the following three keys based on the current tunnel
enable and connection state:
Enable
Connect
Endpoint disabled
Configure
Displays Edit or Delete keys used for settings management
Add New Tunnel Allows you to create a new tunnel configuration. When you click
Add
New Tunnel
, the
VPN Setup
page opens
Event Log
Allows you to access the Event Log page. The Event Log page shows a
history of VPN connections and activity in chronological order and also
displays the IP address of both endpoints on the tunnel (local and
remote)
Note:
On the Event Log page, pressing the
Refresh
key updates the
Event Log table to show any changes since the page was loaded.
Pressing the
Clear
key clears the log table of its current contents and
only the most recent data appears
