8
Catalyst 6500 Series DFC, DFC3A, DFC3B, and DFC3BXL Installation Note
78-11627-04
Required Tools
Required Tools
These tools are required to install the Catalyst 6500 series DFC:
•
Antistatic mat or foam pad to support the removed module
•
Number 1 Phillips screwdriver for the screws and cap nuts that fasten the DFC to the module
•
Your own ESD-prevention equipment or the disposable grounding wrist strap included with all
upgrade kits, field-replaceable units (FRUs), and spares
Whenever you handle a module, always use a wrist strap or other grounding device to prevent
electrostatic discharge (ESD).
Installation Guidelines
Follow these guidelines when installing a DFC:
•
When installing the DFC in a system with a Supervisor Engine 720, observe the following
restrictions for DFC3/PFC3 mismatch:
•
Observe the following cautions:
Caution
During this procedure, wear grounding wrist straps to avoid ESD damage to the module. Do
not directly touch the backplane with your hand or any metal tool, or you could shock
yourself.
PFC Version
DFC Version
Restrictions
PFC3A
DFC3A
No restrictions.
DFC3B
The DFC3B functions as a DFC3A.
DFC3BXL
The DFC3BXL functions as a DFC3A.
PFC3B
DFC3A
You must reset the system after installing a
DFC3A-equipped module.
The PFC3B functions as a PFC3A.
DFC3B
No restrictions.
DFC3BXL
The DFC3BXL functions as a DFC3B.
PFC3BXL
DFC3A
You must reset the system after installing a
DFC3A-equipped module.
The PFC3BXL functions as a PFC3A.
DFC3B
You must reset the system after installing a
DFC3B-equipped module.
The PFC3BXL functions as a PFC3B.
DFC3BXL
No restrictions.
