16-7
Cisco ONS 15310-CL Ethernet Card Software Feature and Configuration Guide, R5.0
June 2005
Chapter 16 CE-100T-8 Ethernet Operation
CE-100T-8 SONET Circuits and Features
The CE-100T-8 supports up to eight low order VCAT circuits. The available circuit sizes are VT1.5-nv,
where n ranges from 1 to 64. The total number of VT members cannot exceed 168 VT1.5s with each of
the two pools on the card supporting 84 VT1.5s. The user can create a maximum of two circuits at the
largest low order VCAT circuit size, VT1.5-64v.
A user can combine CCAT high order, VCAT high order, and VCAT low order circuits in any way as
long as there is a maximum of eight circuits and the mapper chip bandwidth restrictions are observed.
The following table details the maximum density service combinations.
* This LO-VCAT Circuit combination is achievable if the first circuit created on the card is an LO VCAT circuit. If the first circuit
created on the card is HO-VCAT or CCAT STS circuits, then a maximum of six LO-VCAT circuits can be added on the card.
Table 16-5 CCAT High Order Circuit Size Combinations
Number of STS-3c Circuits
Maximum Number of STS-1 Circuits
None 6
1
3
2
None
Table 16-6 VCAT High Order Circuit Size Combinations
Number of STS-1-3v Circuits
Maximum Number of STS-1-2v Circuits
None 2
1
1
2
None
Table 16-7 CE-100T-8 Maximum Service Densities
Service
Combination
STS-3c or
STS-1-3v
STS-1-2v
STS-1
VT1.5-xV (x=1-7)
Number of Active
Service
1
2
0
0
0
2
2
1
1
1
0
3
3
1
0
3
0
4
4
1
0
0
7(x=1-12)*
8*
5
0
2
2
0
4
6
0
1
1
6(x=1-14)
8
7
0
1
0
7(x=1-12)*
8*
8
0
0
6
0
6
9
0
0
3
5(x=1-16)
8
10
0
0
0
8 (x=1-21)
8
