•
RJ-45 cable
•
Switch
Step 1
Connect one end of the RJ-45 cable to the NME port on the Supervisor PIC.
Figure 39: NME Port Connection on the Supervisor PIC
Step 2
Connect the other end of the RJ-45 cable to a switch.
What to Do Next
Route the RJ-45 cable through the Supervisor PIC cable management bracket and chassis-mounted fiber/cable
routing guide
.
Using the Console Port on the Supervisor PIC
The console port provides local administrative access to the router and its command-line interface (CLI).
Before You Begin
•
Install the Supervisor PIC
.
•
Install the Supervisor Card
.
Restrictions
•
Each Supervisor PIC must have a console port connection when running a redundant configuration in
the chassis.
Required Tools and Equipment
•
RJ-45 cable
•
RJ-45-to-DB-9 adapter
Cisco Converged Broadband Routers Hardware Installation Guide
51
Installing the Supervisor in the Cisco cBR Chassis
Using the Console Port on the Supervisor PIC
