Purpose
Command or Action
Adds an IPDR template to the IPDR session.
ipdr template session_id template_name
Example:
Router(config)# ipdr template 1 SAMIS
Step 3
Configuring the IPDR Exporter
IPDR exporter parameters such as keepalive timer count, the maximum number of unacknowledged records,
and unacknowledged timeout interval value can be configured using the following commands.
•
ipdr exporter keepalive
—
Sets the keepalive timer count value on the IPDR Exporter.
•
ipdr exporter max-unacked
—
Sets the maximum number of unacknowledged records on the IPDR
Exporter.
•
ipdr exporter ack-timeout
—
Sets the time interval for acknowledged records on the IPDR Exporter.
The default value for DataAckTimeInterval is 60 seconds and the default value for DataAckSequenceInterval
is 200 seconds.
Note
You can set the values for the IPDR parameters to customize exporter for the collectors used in the facility.
However, these commands are optional, so if not configured, the default values of the commands are used
when
ipdr exporter start
command is executed.
DETAILED STEPS
Purpose
Command or Action
Enables privileged EXEC mode. Enter your password if
prompted.
enable
Example:
Router> enable
Step 1
Enters global configuration mode.
configure terminal
Example:
Router# configure terminal
Step 2
(Optional) Sets the keepalive timer count for the IPDR Exporter.
The valid range is from 5 to 300 seconds. The default value is
300.
ipdr exporter keepalive time_interval
Example:
Router(config)# ipdr exporter keepalive 300
Step 3
Cisco cBR Series Converged Broadband Routers Troubleshooting and Network Management Configuration Guide
for Cisco IOS XE Fuji 16.8.x
115
IPDR Streaming Protocol
Configuring the IPDR Exporter