Americas Headquarters:
© 2009 Cisco Systems, Inc. All rights reserved.
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Installation and Configuration Note for the Cisco
Catalyst 4500 E-Series Supervisor Engine 6L-E
Product Numbers: WS-X45-SUP6L-E= Cisco Catalyst 4500 E-Series Supervisor Engine 6L-E, MEM-X45-512MB-LE,
MEM-X45-1GB-LE
This publication describes how to install and verify the operation of the Catalyst 4500 E-series
Supervisor Engine 6L-E. Refer to the software configuration guide for your switch for configuration
information for the supervisor engines and switching modules.
Note
Catalyst 4500 E-series switching modules require an E-Series Supervisor Engine running a software
image compatible with that supervisor engine. Refer to your switch’s release notes for compatibility
information.
Contents
This document contains these sections:
•
Safety Overview, page 2
•
Supervisor Engine 6L-E, page 7
•
Port Cabling Specifications, page 12
•
Installing the Supervisor Engine, page 15
•
Memory Upgrade, page 18
•
Attaching Module Interface Cables, page 23
•
Configuring Your Supervisor Engine, page 25
•
X2 Installation, page 25
•
Related Documentation, page 27
•
Obtaining Documentation and Submitting a Service Request, page 28
