Cisco Catalyst 3560, Hardware Installation Manual

Page: 68 / 168

Chapter 3 Switch Installation
Preparing for Installation
3-8
Catalyst 3560 Switch Hardware Installation Guide
78-16057-01
Installation Guidelines
When determining where to place the switch, be sure to observe these
requirements:
• For copper Ethernet ports, including 10/100 ports and 1000BASE-T SFP
module ports, cable lengths from the switch to connected devices can be up
to 328 feet (100 meters).
•
Table 3-1 lists the cable specifications for 1000BASE-SX, 1000BASE-LX,
and 1000BASE-ZX fiber-optic SFP module connections. Each port must
match the wave-length specifications on the other end of the cable, and for
reliable communications, the cable must not exceed the stipulated cable
length.
Table 3-1 Fiber-Optic SFP Module Port Cabling Specifications
SFP Module
Wavelength
(nanometers)
Fiber Type
Core Size
(micron)
Modal
Bandwidth
(MHz/km)
Cable Distance
1000BASE-SX 850 MMF 62.5
62.5
50
50 160
200
400
500 722 feet (220 m)
902 feet (275 m)
1640 feet (500 m)
1804 feet (550 m)
1000BASE-LX/LH 1300 MMF
1
SMF
62.5
50
50
9/10 500
400
500
— 1804 feet (550 m)
1804 feet (550 m)
1804 feet (550 m)
32,810 feet (10 km)
1000BASE-ZX 1550 SMF 9/10 — 43.4 to 62 miles (70
to 100 km)
2