Wiring the DC-Input Power Source
20
Using the Catalyst 2924M XL DC Ethernet Switch
78-10499-01
Step 7
Insert the terminal block plug into the terminal block header on the rear panel of
the switch as shown in the figure.
Caution
Secure the wires coming from the terminal block so that they will not
be disturbed by casual contact. For example, use tie wraps to secure
the wires to a rack.
Step 8
Remove the tape from the circuit-breaker switch handle, and restore power by
moving the circuit breaker handle to the on position.
CONSOLE
Tie wrap
31699
INPUT: 36 - 72
CURRENT: 4-2A
+
–
A
+
–
B
REFER TO MANUAL
BEFORE CONNECTING
POWER
