Cisco CallManager Release 3.0 Specification Download Page 71 | Manualshive

Page: 71 / 104

background image

71

Release Notes for Cisco CallManager Release 3.0(10)

78-13493-02

Open Caveats

CSCds55942

AVVID: Call produces cumulative feedback when conferencing back to itself.

Workaround: Avoid conferencing a call back on itself.

CSCds59268

When Call Forward No Answer is configured on a line with partition, the calls
forward to Call Forward No Answer.

Workaround: To continue using the Personal Assistant feature, the following
configuration can be used as a workaround until this problem is fixed. Using setup as
example, configure the calling search space PA to has partition PA only. Phone1 with
DN 2007 has calling search space of PA; then, it can only call phone3; so, when
phone1 dials 2003, phone3 (Personal Assistant) will receive the call.

CSCds62385

Cisco CallManager sends alerting before connect while in progress state.

Workaround: No workaround exists for this problem.

CSCds63434

CALL INIT: User cannot successfully place international calls when using
Cisco Softphone.

Workaround: Remove the OFFNET option on a international call dialing pattern;
then, you receive 10 seconds of silence before placing the call. Decreasing T302 also
decreases the time the dial tone plays or time waiting for an interdigit timeout.

CSCds67113

Cisco IP phone does not forward Network File System (NFS) datagrams for packet
sizes larger than 11832 bytes.

Workaround: Configure the network port to match the speed of the access port.

CSCds67777

Blind transfer cannot complete successfully.

Workaround: No workaround exists.

CSCds75317

A lineRedirect() call back to calling party causes problems.

Workaround: Do not redirect the call back to the caller, which should not happen
under normal circumstances

CSCds79206

Request exists for capability to hardcode speed and duplex on Cisco IP Phone 7960.

Workaround: No workaround exists.

CSCds79401

AVVID: Audio is heard through the handset when using the headset on Cisco IP
Phone 7960

Workaround: No workaround exists.

Table 8

Open Caveats for Cisco CallManager Release 3.0(10) (continued)

DDTS number

Description

«
...
69
70
71
72
73
...
»

Summary of Contents for CallManager Release 3.0









































































































Reviews:

No comments

Related manuals for CallManager Release 3.0

Brand: Navitar Pages: 23

718659340025 - InDesign CS - PC

Brand: Adobe Pages: 122

Integrated Fiery Color Server

Brand: Xerox Pages: 24

Smart Wireless Navigator

Brand: Emerson Pages: 22

Brand: Emerson Pages: 130

Brand: HP Pages: 15

Surestore 5200ex - Optical Disk Drives

Brand: HP Pages: 77

Brand: HP Pages: 778

Auto Configuration Server Vantage Access

Brand: ZyXEL Communications Pages: 113

Brand: EEG Pages: 16

TWIG CONFIGURATOR

Brand: Benefon Pages: 28

Brand: 3Com Pages: 144

FLEXCOLOR V4.5 -

Brand: Hasselblad Pages: 34

Brand: FieldServer Pages: 23

Brand: Yamaha Pages: 26

Brand: Yamaha Pages: 33

38000382 - Macromedia JRun - Mac

Brand: MACROMEDIA Pages: 132

Brand: Native Instruments Pages: 16

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands