Cisco CallManager Release 3.0 Specification Download Page 92 | Manualshive

Page: 92 / 104

background image

Documentation Updates

92

Release Notes for Cisco CallManager Release 3.0(10)

78-13493-02

InputDnSignificantDigits

This parameter is designed to accommodate the differences between
voice mail mailbox numbers and DNs. If a Legacy voice mail system
has mailbox numbers that are longer than the DNs on the system, this
parameter can be used to strip the most significant digits. The
numeric value of this parameter indicates how many digits should be
used.

Note

No provision exists for stripping
digits other than leading ones.

Recommended default value: 10

KeepAliveDn

For most voice mail systems, a value of F is acceptable for a string
parameter. However, some Octel systems periodically send an
invalid DN specifically for the purpose of verifying that the attached
Cisco CallManager is functioning properly. In this case, you can turn
off ValidateDns if you know the DN that the Octel system will use
as a keepalive. By programming that DN into the KeepAliveDn
parameter, you will ensure that the invalid DN message is returned
to the voice mail system when needed.

OutputDnFormat

Use this parameter to format the DNs sent to the voice mail system.
Most numbers passed to the voice mail system are formatted using
this parameter.

Default value: %010s

OutputExternalFormat

Use this parameter is to format the DNs sent to the voice mail
system. Calling party DNs that are seven digits or longer are
formatted using this parameter.

Default value: %010s

Table 11

CMI Service Parameters Not Included in Release 3.0 Documentation (continued)

ParamName

Description

«
...
90
91
92
93
94
...
»

Summary of Contents for CallManager Release 3.0









































































































Reviews:

No comments

Related manuals for CallManager Release 3.0

20032623 - Endpoint Protection Small Business Edition

Brand: Symantec Pages: 351

Element Manager 2.1

Brand: Cabletron Systems Pages: 108

DS 20 - 128 MB Digital Voice Recorder

Brand: Olympus Pages: 48

Brand: Cpanel Pages: 221

CERTIFICATE SYSTEM 8 - DEPLOYMENT

Brand: Red Hat Pages: 132

TWIG CONFIGURATOR

Brand: Benefon Pages: 28

VB Directory System

Brand: VBrick Systems Pages: 21

StreamPlayer v4.4

Brand: VBrick Systems Pages: 32

STRM 2008.2R2 - UPGRADING TO STRM 2008.2R2 REV 2

Brand: Juniper Pages: 5

WebSphere Adapters

Brand: IBM Pages: 226

DEEP FREEZE ENTERPRISE - UPDATE PROCEDURE...

Brand: FARONICS Pages: 15

Brand: Waves Pages: 13

SmartSwitch SmartMIM-216

Brand: Digital Equipment Pages: 26

Brand: HP Pages: 210

Brand: HP Pages: 3

D300s - Evo - 128 MB RAM

Brand: HP Pages: 2

ProBook 4525s - Notebook PC

Brand: HP Pages: 4

ProBook 4525s - Notebook PC

Brand: HP Pages: 149

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands