Cisco C390, Quick Start Manual

Page: 6 / 16

6
For Windows
The exact steps depend on your operating system version.
Step 1
Go to the Start menu and choose Control Panel .
Step 2
Click Network and Internet , then Network and Sharing Center .
Step 3
Click the Change adapter settings link.
Step 4
Right-click Local Area Connection and choose Properties .
Step 5
Click Internet Protocol Version 4 , then choose Properties .
Step 6
Note your current settings.
Step 7
Select Use the Following IP Address .
Step 8
Enter the following changes:
–
IP Address: 192.168.42.43
–
Subnet Mask: 255.255.255.0
–
Default Gateway: 192.168.42.1
Step 9
Click OK and Close to exit the dialog box.
For Mac
The exact steps depend on your operating system version.
Step 1
Launch the Apple menu and choose System Preferences .
Step 2
Click Network.
Step 3
Click the lock icon to allow changes.
Step 4
Select the network configuration with the green icon. This is your active
connection. Then click
Advanced .
Step 5
Click the TCP/IP tab and from Ethernet settings, choose Manually from
the drop-down list.
Step 6
Enter the following changes:
–
IP Address: 192.168.42.43
–
Subnet Mask: 255.255.255.0