Cisco C390, Quick Start Manual

Page: 10 / 16

10
Run the System Setup Wizard
The System Setup Wizard starts automatically when you access the appliance via
the web-based interface (or when you run the
systemsetup command from the
command-line interface.)
Step 1
Start the System Setup Wizard.
Step 2
Accept the end user license agreement.
Step 3
Enter information from the “Document Network Settings” section on
page 3 .
Step 4
Set anti-spam and anti-virus security settings.
Step 5
Review the configuration summary page.
Step 6
Click Install this Configuration .
The appliance may not appear to have accepted your configuration or
be performing the installation. This is because you have changed the IP
address, but the installation is underway.
Step 7
If you temporarily changed the IP address of your computer as
described in the
“Temporarily Change Your IP Address for Remotes
Access” section on page 5 , change the IP address settings back to the
original values.
Step 8
Ensure that your laptop and the appliance are connected to the
network.
Step 9
Log back in to the appliance with the username admin and the new
password that you set in the System Setup Wizard.
The Cisco C390 Email Security Appliance uses a self-signed certificate
that may trigger a warning from your web browser. You can simply
accept the certificate and ignore this warning.
Step 10
Write down your new administrator password and keep it in a safe
place.