6-15
Cisco 3200 Series Router Hardware Reference
OL-5816-10
Chapter 6 Wireless Mobile Interface Cards
Receive Sensitivity
Table 6-10
shows the receive sensitivity for the 4.9-GHz WMIC.
5.0-GHz (802.11h) Radio Features
The 5-GHz radio supports only 20-MHz channelization. In addition, the 5-GHz radio supports Dynamic
Frequency Selection (DFS) and Transmission Power Control (TPC) in the ETSI and FCC regulatory
domains.
For more information about DFS and TPC, see
Radio Channels and Transmit Frequencies
at
http://www.cisco.com/en/US/products/hw/routers/ps272/products_installation_and_configuration_guid
es_list.html
.
Note
802.11h is supported only in the ETSI regulatory domain.
Note
By default, the C3205 WMIC uses the right antenna to receive and transmit data.
5.0-GHz (802.11h) Channels
The 5.0-GHz (802.11h) radio in the Cisco 3200 Series router (currently available as the Cisco 3205
WMIC) supports the following channels and frequencies in the ETSI regulatory domain:
•
5.250 GHz to 5.350 GHz: 5260 MHz (52), 5280 MHz (56), 5300 MHz (60), 5320 MHz (64),
•
5.470 GHz to 5.725 GHz: 5500 MHz (100), 5520 MHz (104), 5540 MHz (108), 5560 MHz (112),
5580 MHz (116), 5600 MHz (120), 5620 MHz (124), 5640 MHz (128), 5660 MHz (132),
5680 MHz (136), 5700 MHz (140). (Channels 52 through 140 are ETSI outdoor channels.)
16 QAM
6 Mbps and 9 Mbps
12 Mbps and 18 Mbps
24 Mbps and 27 Mbps
64 QAM
12 Mbps and 13.5 Mbps
24 Mbps and 27 Mbps
48 Mbps and 54 Mbps
Table 6-9
Modulations and Data Rates (continued)
Modulation
5 Mbps
10 Mbps
20 Mbps
Table 6-10
Receive Sensitivity for the 4.9-GHz WMIC
5 MHz
10 MHz
20 MHz
1.5 Mbps
-89 dBm
3 Mbps
-87 dBm
6 Mbps
-85 dBm
2.25 Mbps
-89 dBm
4.5 Mbps
-87 dBm
9 Mbps
-85 dBm
3 Mbps
-89 dBm
6 Mbps
-87 dBm
12 Mbps
-85 dBm
4.5 Mbps
-85 dBm
9 Mbps
-87 dBm
18 Mbps
-82 dBm
6 Mbps
-82 dBm
12 Mbps
-85 dBm
24 Mbps
-79 dBm
9 Mbps
-79 dBm
18 Mbps
-79 dBm
36 Mbps
-76 dBm
12 Mbps
-74 dBm
24 Mbps
-74 dBm
48 Mbps
-71 dBm
13.5 Mbps
-72 dBm
27 Mbps
-72 dBm
54 Mbps
-69 dBm
