Cisco BEFW11S4 User Manual Download Page 68 | Manualshive

Page: 68 / 69

background image

61

Appendix I: Regulatory Information

Wireless-B Broadband Router

Caution: This equipment is intended to be used in all EU and EFTA countries. Outdoor use may be restricted to
certain frequencies and/or may require a license for operation. Contact local Authority for procedure to follow.

Note: Combinations of power levels and antennas resulting in a radiated power level of above 100 mW equivalent
isotropic radiated power (EIRP) are considered as not compliant with the above mentioned directive and are not
allowed for use within the European community and countries that have adopted the European R&TTE directive
1999/5/EC.

For more details on legal combinations of power levels and antennas, contact Linksys Corporate Compliance.

•

Linksys vakuuttaa täten että Wireless-B Broadband Router tyyppinen laite on direktiivin 1999/5/EY oleellisten
vaatimusten ja sitä koskevien näiden direktiivien muiden ehtojen mukainen.

•

Linksys Group déclare le Routeur d'accès sans fil-B est conforme aux conditions essentielles et aux
dispositions relatives à la directive 1999/5/EC.

•

Belgique:

Dans le cas d'une utilisation privée, à l'extérieur d'un bâtiment, au-dessus d'un espace public, aucun
enregistrement n'est nécessaire pour une distance de moins de 300m. Pour une distance supérieure à 300m
un enregistrement auprès de l'IBPT est requise. Pour une utilisation publique à l'extérieur de bâtiments, une
licence de l'IBPT est requise. Pour les enregistrements et licences, veuillez contacter l'IBPT.

•

France F:

2.4 GHz Bande : les canaux 10, 11, 12, 13 (2457, 2462, 2467, et 2472 MHz respectivement) sont
complétement libres d'utilisation en France (en utilisation intérieur). Pour ce qui est des autres canaux, ils
peuvent être soumis à autorisation selon le départment. L'utilisation en extérieur est soumis à autorisation
préalable et très restreint.

Vous pouvez contacter l'Autorité de Régulation des Télécommunications (http://www.art-telecom.fr) pour de
plus amples renseignements.

«
...
66
67
68
69
»

Summary of Contents for BEFW11S4






































































Reviews:

No comments

Related manuals for BEFW11S4

Brand: Paradyne Pages: 112

Brand: Cambium Networks Pages: 215

Brand: Paradyne Pages: 1

Brand: Idis Pages: 31

Brand: Patton electronics Pages: 65

Brand: QNAP Pages: 39

LinkStation Mini

Brand: Buffalo Pages: 71

Brand: UHP Pages: 15

Brand: Ubiquiti Pages: 21

Brand: Avaya Pages: 73

S3000-EI Series

Brand: Quidway Pages: 16

Brand: ZyXEL Communications Pages: 8

Brand: BinTec Pages: 2

Brand: Omron Pages: 4

Brand: Cabletron Systems Pages: 56

BIANCA/BRICK XS

Brand: BinTec Pages: 2

Bipac 74 Series

Brand: Billion Pages: 8

Brand: Devolo Pages: 24

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands