Cisco BEFW11S4 User Manual Download Page 67 | Manualshive

Page: 67 / 69

background image

60

Appendix I: Regulatory Information

Wireless-B Broadband Router

Appendix I: Regulatory Information

FCC STATEMENT

This product has been tested and complies with the specifications for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used according to the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which is found by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following measures:

•

Reorient or relocate the receiving antenna

•

Increase the separation between the equipment or devices

•

Connect the equipment to an outlet other than the receiver's

•

Consult a dealer or an experienced radio/TV technician for assistance

FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

INDUSTRY CANADA (CANADA)

This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
The use of this device in a system operating either partially or completely outdoors may require the user to obtain
a license for the system according to the Canadian regulations.

EC DECLARATION OF CONFORMITY (EUROPE)

Linksys declares that the Wireless-B Broadband Router conforms to the specifications listed below, following the
provisions of the European R&TTE directive 1999/5/EC:

•

EN 301 489-1, 301 489-17 General EMC requirements for Radio equipment.

•

EN 609 50 Safety

•

EN 300-328-1, EN 300-328-2 Technical requirements for Radio equipment.

«
...
65
66
67
68
69
»

Summary of Contents for BEFW11S4






































































Reviews:

No comments

Related manuals for BEFW11S4

Brand: 4IPNET Pages: 97

Brand: Garmin Pages: 2

Brand: ICP DAS USA Pages: 14

Brand: ICP DAS USA Pages: 25

Brand: ICP DAS USA Pages: 15

Brand: ICP Pages: 14

Brand: ICP DAS USA Pages: 8

Brand: Vivotek Pages: 136

Brand: iDirect Pages: 52

HiGain HLU-231 List 8F

Brand: ADC Pages: 7

Brand: Telex Communications Pages: 28

Brand: QNAP Pages: 54

Brand: WAGO Pages: 48

EdgeRouter PoE ERPoe-5

Brand: Ubiquiti Pages: 13

Brand: XtendLan Pages: 21

Brand: Ariesys Pages: 10

Brand: Microtek Pages: 25

Brand: Keysight Technologies Pages: 106

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands