Cisco ATA 187 Administration Manual Download Page 36

Page: 36 / 80

4-4

Cisco ATA 187 Analog Telephone Adaptor Administration Guide for SIP (Version 1.0)

OL-21862-01

Chapter 4 Configuring the ATA 187

Telephony Features Available for the ATA 187

Privacy

Prevents users who share a line from adding themselves to
a call and from viewing information on their phone screens
about the call of the other user.

For more information refer to:

•

Cisco Unified Communications
Manager Administration Guide,

Cisco Unified IP Phone
Configuration

•

Cisco Unified Communications
Manager System Guide,

Cisco

Unified IP Phones

•

Cisco Unified Communications
Manager Features and Services
Guide

Barge and Privacy

Redial

Allows users to call the most recently dialed phone number
by pressing a softkey.

Requires no configuration.

Shared line

Allows a user to have several phones that share the same
phone number or allows a user to share a phone number with
a coworker.

For more information refer to the

Cisco

Unified Communications Manager
System Guide,

Understanding Directory

Numbers

Speed dialing

Allows users to speed dial a phone number by entering an
assigned index code (1 to 9) on the phone keypad.

Note

You can use Speed Dialing while on-hook or
off-hook.

Users assign index codes from the User Options web pages.

For more information, refer to:

•

Cisco Unified Communications
Manager Administration Guide,

Cisco Unified IP Phone
Configuration

•

Cisco Unified Communications
Manager System Guide,

Cisco

Unified IP Phones

Time Zone Update

Updates the IP phone with time zone changes.

For more information, refer to the

Cisco

Unified Communications Manager
Administration Guide

Date/Time Group

Configuration

Voice-messaging
system

Enables callers to leave messages if calls are unanswered.

For more information refer to:

•

Cisco Unified Communications
Manager Administration Guide,

Cisco Voice-Mail Port
Configuration

•

Cisco Unified Communications
Manager System Guide

Voice Mail

Connectivity to Cisco
Unified Communications Manager

Table 4-1

Telephony Features for the ATA 187 (continued)

Feature

Description Configuration

Reference

Summary of Contents for ATA 187

















































































Search results

Summary of Contents for ATA 187

Reviews:

Related manuals for ATA 187

Brands by name

Popular brands

Cisco ATA 187, Administration Manual

Search results

Summary of Contents for ATA 187

Reviews:

Related manuals for ATA 187

Brands by name

Popular brands