Cisco ATA 187 Administration Manual Download Page 9 | Manualshive

Page: 9 / 80

background image

ix

Cisco Analog Telephone Adapter 187 Administration Guide for SIP 1.0

OL-21862-01

Preface

Cisco Unified Communications Manager Business Edition

These publications are available at the following URL:

http://www.cisco.com/en/US/products/ps7273/tsd_products_support_series_home.html

Obtaining Documentation, Obtaining Support, and Security
Guidelines

For information on obtaining documentation, obtaining support, providing documentation feedback,
security guidelines, and also recommended aliases and general Cisco documents, see the monthly What’s
New in Cisco Product Documentation, which also lists all new and revised Cisco technical
documentation, at:

http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html

Cisco Product Security Overview

This product contains cryptographic features and is subject to United States and local country laws
governing import, export, transfer and use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption. Importers, exporters, distributors
and users are responsible for compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable to comply with U.S. and local
laws, return this product immediately.

Further information regarding U.S. export regulations may be found at

http://www.access.gpo.gov/bis/ear/ear_data.html

.

Document Conventions

This document uses the following conventions:

Convention

Description

boldface

font

Commands and keywords are in

boldface

.

italic

font

Arguments for which you supply values are in

italics

.

[ ]

Elements in square brackets are optional.

{ x | y | z }

Alternative keywords are grouped in braces and separated by vertical bars.

[ x | y | z ]

Optional alternative keywords are grouped in brackets and separated by vertical bars.

string

A nonquoted set of characters. Do not use quotation marks around the string or the
string will include the quotation marks.

screen

font

Terminal sessions and information the system displays are in

screen

font.

boldface
screen

font

Information you must enter is in

boldface screen

font.

italic screen

font

Arguments for which you supply values are in

italic screen

font.

«
...
7
8
9
10
11
...
»

Summary of Contents for ATA 187

















































































Reviews:

No comments

Related manuals for ATA 187

Brand: Ubiquiti Pages: 24

Brand: U.S. Converters Pages: 49

Brand: PROLiNK Pages: 12

SoundStation ITA

Brand: Polycom Pages: 12

Brand: Agilent Technologies Pages: 32

Brand: TAPaulk Communications Pages: 3

Brand: Targus Pages: 34

Brand: Valcom Pages: 8

PRESTO GIGABIT SERVER PCIe

Brand: Sonnet Pages: 4

Brand: Macpower & Tytech Pages: 26

BlackBird SemiPro 3xHS

Brand: Kvaser Pages: 48

FriendlyNET GigaNIX 1000TA/TPC

Brand: Asante Pages: 39

Brand: Chauvet Pages: 3

VLT Midi Drive FC 280

Brand: Danfoss Pages: 144

Brand: KERN Pages: 13

Brand: Terra Pages: 2

Brand: NVT Phybridge Pages: 2

Brand: Radial Engineering Pages: 12

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands