C H A P T E R
1
Cisco ASR 920 Series Aggregation Services
Router Overview
The Cisco ASR 920 Series Aggregation Services Router is a family of fixed configuration routers that
provides common network architecture to the Service Providers for macro and small cell networks.
This router acts as an access device for mobile backhaul services
—
macro Cell Site Router (CSR) and Small
Cell Router (SCR). As an access device, it provides capabilities like 1GE/10GE, MPLS, H-QoS, Services,
GPS clocking, PoE and fit within ETSI 300 mm depth cabinet. It can easily be integrated into the Unified
MPLS for Mobile Transport (UMMT) and Fixed Mobile Convergence (FMC) solution.
•
Cisco ASR 920 Router Features, page 1
•
GigabitEthernet Copper Ports, page 2
•
•
•
Cisco ASR 920 Router Features
The router provides 1GE/10GE, MPLS, H-QoS, high availability hardware design, advanced Ethernet
Operations, Administration, and Maintenance (OAM), as well as advanced timing support, including satellite
timing (GNSS) based clocking, and PoE in one platform.
•
ASR-920-12SZ-IM
—
This router has fixed Ethernet interfaces (8x1G 4x1G SFP + 4x10G/1G
(dual rate)
•
ASR-920-12SZ-IM-CC
—
Has the same specifications as the above variant. However, this chassis is
coated with an acrylic-based material to help improve the reliability against air-borne contamination.
The following table provides snapshot of the number and type of supported ports:
Cisco ASR-920-12SZ-IM Aggregation Services Router Hardware Installation Guide
1
