2
1 Purpose
The purpose of this document is to give an overall description of the hardware requirements of
the WLAN module used in Kenton project.
1.1 Scope
This document contains the requirements for the subject system and its top-level or architectural
design for an ODM partner. This document should only contain information needed to design
the system, since this document will go to multiple ODM vendors during the RFQ process.
The requirements specify the behavior of the system, both hardware and software. They do not
specify "how" the system will be built except for necessary constraints on the design such as
needed interfaces to other systems or valid constraints on size, shape, processor and memory
utilization, power consumption, etc. The behavior may be described in terms of how the system
enables the end user to perform work (i.e., the functions, performance, quality requirements, etc).
The architectural design describes the components of the system, their individual functions and
performance, and how they interface with each other.
Development considerations such as schedule, cost, development process, and staffing are not
included in this specification.
2 Functional Overview
2.1 System Overview
The Kenton WLAN module is designed f to be a pluggable module assembly to the wireless
version of Kenton Desktop Security Appliance. It will provide the following functionalities:
2x2 100mW
Dual Radios,
802.11n
Internal Antennas