About Cisco IOS and Cisco IOS XE Software Documentation
Documentation Organization
x
Cisco IOS Service Selection Gateway Configuration Guide
Cisco IOS Service Selection Gateway Command Reference
Subscriber authentication, service access, and accounting.
Cisco IOS Software Activation Configuration Guide
Cisco IOS Software Activation Command Reference
An orchestrated collection of processes and components to
activate Cisco IOS software feature sets by obtaining and
validating Cisco software licenses.
Cisco IOS Software Modularity Installation and
Configuration Guide
Cisco IOS Software Modularity Command Reference
Installation and basic configuration of software modularity
images, including installations on single and dual route
processors, installation rollbacks, software modularity binding,
software modularity processes and patches.
Cisco IOS Terminal Services Configuration Guide
Cisco IOS Terminal Services Command Reference
Cisco IOS XE Terminal Services Command Reference
DEC, local-area transport (LAT), and X.25 packet
assembler/disassembler (PAD).
Cisco IOS Virtual Switch Command Reference
Virtual switch redundancy, high availability, and packet handling;
converting between standalone and virtual switch modes; virtual
switch link (VSL); Virtual Switch Link Protocol (VSLP).
Note
For information about virtual switch configuration, refer
to the product-specific software configuration
information for the Cisco Catalyst 6500 series switch or
for the Metro Ethernet 6500 series switch.
Cisco IOS Voice Configuration Library
Cisco IOS Voice Command Reference
Cisco IOS support for voice call control protocols, interoperability,
physical and virtual interface management, and troubleshooting.
The library includes documentation for IP telephony applications.
Cisco IOS VPDN Configuration Guide
Cisco IOS XE VPDN Configuration Guide
Cisco IOS VPDN Command Reference
Layer 2 Tunneling Protocol (L2TP) dial-out load balancing and
redundancy, L2TP extended failover, L2TP security VPDN,
multihop by Dialed Number Identification Service (DNIS),
timer and retry enhancements for L2TP and Layer 2 Forwarding
(L2F), RADIUS Attribute 82: tunnel assignment ID, shell-based
authentication of VPDN users, tunnel authentication via
RADIUS on tunnel terminator.
Cisco IOS Wide-Area Networking Configuration Guide
Cisco IOS XE Wide-Area Networking Configuration Guide
Cisco IOS Wide-Area Networking Command Reference
Frame Relay, Layer 2 Tunneling Protocol Version 3 (L2TPv3),
Link Access Procedure, Balanced (LAPB), Switched
Multimegabit Data Service (SMDS), and X.25.
Cisco IOS Wireless LAN Configuration Guide
Cisco IOS Wireless LAN Command Reference
Broadcast key rotation, IEEE 802.11x support, IEEE 802.1x
authenticator, IEEE 802.1x local authentication service for
Extensible Authentication Protocol-Flexible Authentication via
Secure Tunneling (EAP-FAST), Multiple Basic Service Set ID
(BSSID), Wi-Fi Multimedia (WMM) required elements, and
Wi-Fi Protected Access (WPA).
Table 1
Cisco IOS and Cisco IOS XE Configuration Guides and Command References (continued)
Configuration Guide and Command Reference Titles
Features/Protocols/Technologies
