Cisco AMP Threat Grid Appliance Setup and Configuration Guide
TEST THE APPLIANCE SETUP - SUBMIT A SAMPLE
41
TEST THE APPLIANCE SETUP - SUBMIT A SAMPLE
Once the Threat Grid Appliance is updated to the current version, the final test that your appliance has
been configured properly is to submit a malware sample using the Threat Grid software.
1.
Sign into the AMP Threat Grid Portal by visiting the address you configured as the Clean interface. The
Threat Grid login page opens:
Figure 26 - Threat Grid Portal Login Page
2.
Enter the default Login and Password:
admin/changeme
3.
Click
Login
. The main Threat Grid
Sample Analysis
page opens.
4.
In the
Submit a Sample
box located in the upper-right corner, to select a sample file or enter
a URL
to
submit
for malware analysis
.
5.
Click
Upload Sample
. The Threat Grid sample analysis process is launched.
You should see your sample going through several stages of analysis. During analysis, the sample is
listed in the
Submissions
section. Once analysis is completed, the results should be available in the
Samples
section, with details in the Analysis Report.
