Cisco AMP Threat Grid Appliance Setup and Configuration Guide
PLANNING
10
Login Names and Passwords - Defaults
Web UI Administrator
Login:
admin
Password:
"changeme"
OpAdmin and Shell user
Use the initial Threat Grid/TGSH Dialog randomly generated password, and then the new password
entered during the first step of the OpAdmin configuration workflow.
If you lose the password, follow the
Lost Password
instructions located in the
Support
section of the
Threat Grid Appliance Administrator's Guide
.
CIMC (Cisco Integrated Management Controller)
Login:
admin
Password:
"password"
Setup and Configuration Steps Outline
The following setup and initial configuration steps are described in this document:
Server Setup.
Network Interface Connections Setup:
•
Admin
•
Clean
•
Dirty
Initial Network Configuration - TGSH Dialog.
Main Configuration – OpAdmin Portal.
Install Updates.
Test the Appliance setup: Submit a Sample for Analysis.
Admin Configuration – Complete the remaining administrative configuration tasks (license installation, email
server, SSL Certificates, etc.) in the OpAdmin Portal as documented in the
Threat Grid Appliance
Administrator's Guide
.
Time Required for Setup and Configuration
You should allow yourself approximately 1 hour to complete the server setup and initial configuration steps.
Note:
Please be patient during the "Apply" sections of the TGSH Dialog during the initial Appliance
configuration installation steps. These steps can sometimes take more than 10 minutes to complete.
