Cisco AMP Threat Grid Appliance Setup and Configuration Guide
CONFIGURATION WIZARD - OPADMIN PORTAL
33
NTP Server Configuration
This is where you identify the NTP ("Network Time Protocol") servers.
1.
Enter the
NTP Server
(s) IP or NTP name.
If there are multiple NTP Servers, separate them with a space or a comma.
2.
Ignore Current System Time and Synchronize with Browser.
3.
Click
Next
.
The
Review and Install
page opens with checkboxes next to all of the Configuration steps.
Continue with the next section:
Review and Install Configuration Settings
Now that you have entered your network configuration settings, you must install them as described below.
1.
In the
Review and Install
page, click
Start Installation
.
Configuration scripts are installed and you see the message: "
The appliance is installing...
".
Note:
Have patience. Please allow 10+ minutes for this step to complete. The screen will display
configuration information as it is applied.
