Cisco AMP Threat Grid Appliance Setup and Configuration Guide
INSTALLING THREAT GRID APPLIANCE UPDATES
37
INSTALLING THREAT GRID APPLIANCE UPDATES
After you complete the initial Threat Grid Appliance setup we recommend that you install any available
updates before continuing.
Threat Grid Appliance updates are applied through the
OpAdmin
Portal.
1.
From the
Operations
menu, select
Update Appliance
. The updates page opens, displaying the current
build of the appliance.
2.
Click
Check/Download Updates
. The software checks to see if there is a more recent update/version
of the Threat Grid Appliance software, and if so, it is downloaded. This may take some time.
3.
Once the updates have been downloaded, click
Run Update
to install them.
For more information about installing updates, see the
Threat Grid Appliance Administrator's Guide
.
Appliance Build Number
The build number of an appliance can be viewed on the Updates page: OpAdmin
Operations
>
Update
Appliance
:
Figure 25 - Appliance Build Number
