38
<Default router> is the IP address of the default router, such as 10.0.0.1
<DNS Server> is the IP address of the DNS server, such as 10.0.10.2
Step 3
Add the option 60 line using the following syntax:
option 60 ascii “
VCI string
”
For the
VCI string
, “Cisco AP c3602”. The quotation marks must be included.
Step 4
Add the option 43 line using the following syntax:
option 43 hex
<
hex string
>
The
hex string
is assembled by concatenating the TLV values shown below:
Type
+
Length
+
Value
Type
is always
f1(hex)
.
Length
is the number of controller management IP addresses times 4
in hex.
Value
is the IP address of the controller listed sequentially in hex.
For example, suppose that there are two controllers with management interface IP addresses,
10.126.126.2 and 10.127.127.2. The type is
f1(hex)
. The length is
2 * 4 = 8 = 08 (hex)
. The IP
addresses translate to
0a7e7e02
and
0a7f7f02.
Assembling the string then yields
f1080a7e7e020a7f7f02
. The resulting Cisco IOS command added to the DHCP scope is
option 43 hex
f1080a7e7e020a7f7f02
.
14
Access Point Specifications
Table 2 lists the technical specifications for 3602 series access points.
Table 2
Access Point Specifications
Category
Specification
Dimensions (LxWxD)
8.69 x 8.69 x 2.11 in. (22.07 x 22.07 x 5.35 cm)
Weight
2.5 lbs (1.13 kg)
Operating temperatures AP3602E: -4 to 131 degrees F (-20 to 55 degrees C)
AP3602I: 32 to 104 degrees F (0 to 40 degrees C)
Storage temperature
–22 to 185 degrees F (–30 to 85 degrees C)
Humidity
10% to 90% (noncondensing)
Antennas
AP3602I: Integrated; AP3602E: External
