3-10
Cisco Aironet 1570 Series Outdoor Access Point Hardware Installation Guide
OL-32138-01
Chapter 3 Mounting the Access Point
Strand Mount Kit 2
Figure 3-4
AP Mounted Using SMK2 - Dimensions in inches [and millimeters]
Strand Mounting Using SMK2
When mounting the access point on a cable strand where you need to accommodate a cable bundle also,
you must use SMK2 strand mount kit.
Note
The access point must be installed on a cable strand by a professional cable installer.
lists the materials you need to strand mount the AP using SMK2.
Table 3-2
Materials Needed to Mount the AP using SMK2
To mount the access point, follow these steps:
61.6
353703
2.42
200.7
7.90
Material Needed
In Kit?
SMK2 strand mount kit
Yes
Four M8 x16mm button-head bolts, and its washers
Yes
5 mm hex wrench
No
13 mm box-end wrench
No
