1-10
Cisco Aironet 1570 Series Outdoor Access Point Hardware Installation Guide
OL-32138-01
Chapter 1 Product Overview
Parts of each Access Point Model
Base of the AP
The Base of the AP is identifiable by the four LED status lights and the Reset button on it. The base of
the AP faces downwards when the AP is mounted in a vertical orientation. The base for different AP
models is shown in
Figure 1-8
Base of the AP on AP1572IC model
1
Cable stinger port for Power-over-Cable.
2
Unused port slot
3
Ethernet port
4
SFP port
5
Stinger trim measure for cutting any non-Cisco cable
stinger to size
6
Screw covering Reset Button
7
Status LEDs labeled “A” to “D”
1
1.
The LEDs are visible when AP is installed in both horizontal and vertical orientations.
353251
7
1
5
6
3
4
2
