2-35
Cisco Aironet 1250 Series Access Point Hardware Installation Guide
OL-8247-03
Chapter 2 Installing the Access Point
Inserting a Radio Module
Step 3
Slowly slide the radio module into the access point and ensure the module latch is properly positioned
into the radio module notch (see
Figure 2-27
).
Figure 2-27
Module Latch Position During Module Installation
Step 4
Use your thumb to push the module latch towards the lock position while squeezing with your fingers to
push the radio module into the access point (see
Figure 2-28
). Continue pushing until the latch aligns
with the Lock mark on the access point.
1
Radio module latch notch
3
Latch open position
2
Module latch
230902
3
2
1