2-13
Cisco Aironet 1250 Series Access Point Hardware Installation Guide
OL-8247-03
Chapter 2 Installing the Access Point
Mounting Above a Suspended Ceiling
Caution
The 1250 series power injector (AIR-PWRINJ4), 1250 series DC power module (AIR-PWR-SPLY1),
and the antennas have not been tested to UL 2043 and they should not be placed in a building’s
environmental air space, such as above suspended ceilings.
The access point mounting bracket has been redesigned to permit the use of the B-Line and Erico
mounting systems.
Installing Option One
This section provides instructions to installation 1 (B-Line mounting system) above a suspended ceiling.
Follow these steps to mount the access point above a suspended ceiling using option 1. It may be helpful
to refer to
Figure 2-7
before you begin.
Figure 2-7
Option 1 Mounting Details
Note
The illustration shows the access point mounting plate mounted perpendicular to the adjustable
height box hanger. You can also mount the bracket parallel to the box hanger.
1
Suspended ceiling T-rail
4
Access point mounting bracket
2
T-rail clip
5
Access point mounting clip
3
adjustable height box hanger
6
Height adjustment rails
275
8
15
1
3
2
6
6
2
1
4
5