Cisco 881 SRST - EN Security Router, Manual

Page: 53 / 62

1-39
Cisco SRST SNMP MIB Release 3.4 Guide
OL-7959-01
Chapter 1 Cisco SRST SNMP MIB Support
CISCO-SRST-MIB Object Groups
csrstLimitDNType read-only This object indicates the type of IP phone to which the
limit-dn is applied to.
ipPhone7910 (1),
ipPhone7935 (2),
ipPhone7940 (3),
ipPhone7960 (4),
ipPhone7970 (5),
ipPhone7936 (6)
csrstLimitDN read-only This object indicates the maximum number of
directory numbers available to each type of IP phone.
The current range of maximum lines setting is from 1
to 34. The default is 6.
csrstNotificationEnabled read-write This variable indicates whether this system produces
the SRST notifications. A false value will prevent
SRST notifications from being generated by this
system.
csrstNotifInfoGroup
csrstSysNotifSeverity accessible-
for-notify The internally-defined severity of the particular alarm
condition, associated with the most recent SNMP
notification. A subsequent event in which the alarm
condition changes from its failed state back to a
'normal' state has a severity of 'clear'. This
severity-level value is supplied with each SRST
specific notification.
csrstSysNotifReason accessible-
for-notify The internally-defined failure cause of the particular
alarm condition, associated with the most recent
system notification.
csrstActiveStatsGroup
csrstState read-only This object indicates the current state of Cisco SRST
feature on this router.
Active - At least one IP or SIP phone is registered
Inactive - Cisco SRST has no IP or SIP phones
registered
This object has no significance if csrstEnabled object
is disabled.
csrstSipPhoneCurrentRegiste
red read-only Total number of SIP phones currently registered to the
SRST router.
csrstSipCallLegs read-only Total number of SIP call legs routed through the SRST
router since going active. This includes incoming and
outgoing calls.
Table 1-6 SRST MIB Object Groups and Descriptions (continued)
MIB Group MIB Object
Max
Access
Description