1-36
Cisco SRST SNMP MIB Release 3.4 Guide
OL-7959-01
Chapter 1 Cisco SRST SNMP MIB Support
CISCO-SRST-MIB Object Groups
csrstScriptName
read-only
Cisco SRST session-level IVR application script. This
application can be written in Tool Command Language
(TCL) and is applied to all Cisco IP phone lines served
by the SRST router. If no application script name is
configured, the default built-in IOS application will be
applied to all phone lines served by the SRST router
and this object will be a zero-length string.
csrstSecondaryDialTone
read-only
Cisco SRST secondary dial tone digits. When a Cisco
IP phone user dials a PSTN access prefix, defined by
the secondary dial tone digits, the secondary dial tone
is enabled.
csrstTransferSystem read-only
Cisco
SRST call transfer method using the ITU-T
H.450.2 standard. Default setting is blind.
blind (1),
fullBlind (2),
fullConsult (3),
localConsult (4)
blind - Calls are transferred without consultation using
a single phone line and the Cisco proprietary method.
fullBlind - Calls are transferred without consultation
using H.450.2 standard methods.
fullConsult - Calls are transferred using H.450.2 with
consultation using the second phone line if available,
or the calls fall back to full-blind if the second line is
unavailable.
localConsult - Calls are transferred with local
consultation using the second phone line if available,
or the calls fall back to blind for non- local
consultation or transfer target. This mode is intended
for use primarily in Voice over Frame Relay (VoFR)
networks.
Table 1-6
SRST MIB Object Groups and Descriptions (continued)
MIB Group
MIB Object
Max
Access
Description
