2-15
Cisco 827 and SOHO 77 Routers Hardware Installation Guide
78-6854-03
Chapter 2 Installation
Using the Router LEDs to Check Links
Using the Router LEDs to Check Links
Use the LEDs on the front of the router to check the links between the router and attached Ethernet
devices or telephones. Use
Table 2-5
to verify the link status of devices attached to Cisco 827, Cisco
827-4V, and SOHO 77 routers.
Use
Table 2-6
to verify the link status of devices attached to Cisco 827H and SOHO 77H routers.
Table 2-5
LED Patterns for CIsco 827, Cisco 827-4V and SOHO 77 Routers
Power/Link
LEDs to Check
Normal Patterns
Power
OK
On
To hub, server, PC,
or workstation
ETHERNET 1, ETHERNET
RXD, and ETHERNET TXD
•
ETHERNET 1 is on when the Ethernet is
physically connected.
•
ETHERNET RXD blinks when an Ethernet
port receives an Ethernet packet.
•
ETHERNET TXD blinks when an Ethernet
port sends an Ethernet packet.
To analog
telephone or fax
machine
(827-4V only)
PHONE 1, PHONE 2,
PHONE 3, PHONE 4
1
1.
You can also pick up the handset and listen for a dial tone.
On when telephone or fax machine is in use.
Table 2-6
LED Patterns for Cisco 827H and SOHO 77H Routers
Power/Link
LEDs to Check
Normal Patterns
Power
OK
On
To hub, server, PC,
or workstation
ETHERNET 1, 2, 3, or 4;
ETHERNET RXD; and
ETHERNET TXD
•
ETHERNET LED is on when the Ethernet is
physically connected to the appropriate port.
•
RXD LED blinks when an Ethernet port
receives an Ethernet packet.
•
TXD LED blinks when an Ethernet port
sends an Ethernet packet.
