Cisco 7920 Series, User Manual

Page: 61 / 134

Basic Call Handling
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G User Guide for Cisco Unified Communications Manager
FCS REVIEW DRAFT - CISCO CONFIDENTIAL
Using cBarge
You can create a conference by using cBarge to add yourself to a call on a shared line.
Using Meet-Me
Meet-Me conferencing allows you to start or join a conference by calling the conference number.
If you want to... Then...
Create a conference by
barging a call on a shared line
1.
Press to select a call on a shared line.
2. Choose Options > cBarge .
See Using a Shared Line, page 60 .
See a list of conference
participants or remove
participants Choose Options > ConfList . See Viewing or Removing Conference
Participants, page 52 .
If you want to... Then...
Start a Meet-Me conference
1.
Obtain a Meet-Me phone number from your system administrator.
2.
Distribute the number to participants.
3. When you are ready to start the meeting, choose Options >
MeetMe.
4.
Dial the Meet-Me conference number.
5.
Press .
Participants can now join the conference by dialing in.
Note Participants hear a busy tone if they call the conference before the
initiator has joined. In this case, participants must call back.
Join a Meet-Me conference 1. Dial the Meet-Me conference number (provided by the conference
initiator).
2.
Press .
Note
You will hear a busy tone if you call the conference before the
initiator has joined. In this case, try your call again.
End a Meet-Me conference All participants must hang up.
The conference does not automatically end when the conference
initiator disconnects.