Cisco 7920 Series, User Manual

Page: 53 / 134

Basic Call Handling
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G User Guide for Cisco Unified Communications Manager
FCS REVIEW DRAFT - CISCO CONFIDENTIAL
Tips
• Engaging the Hold feature typically generates music or a beeping tone for the person on hold.
•
If you receive an alert for an incoming call and a reverting call at the same time, by default your
phone will shift the focus of the phone screen to display the incoming call. Your system
administrator can change this focus priority setting.
•
If you use a shared line, Hold Reversion rings only on the phone that put the call on hold, not on
the other phones that share the line.
•
Your system administrator determines the Hold Reversion alert duration.
Using Mute
With Mute enabled, you can hear other parties on a call, but they cannot hear you. You can use Mute
with the phone or a headset.
Remove a call from
hold on a different line
1.
Press to change to another line.
2. Press Resume .
Note If a single call is holding on this line, the call automatically resumes. If
another call is holding, scroll to the appropriate call and press
Resume.
Move a call on a shared
line to your wireless
phone or to your desk
phone 1. From the phone with the active call on the shared line, press Hold .
2. From your other phone with the shared line, press Resume .
If you want to... Then...
Toggle Mute on During a call, press on left side of phone. The icon appears
at the top of the phone screen.
Toggle Mute off Press . The icon disappears.

If you want to... Then...