B-1
Cisco 7401ASR Installation and Configuration Guide
OL-5419-01 B0
A P P E N D I X
B
PXF Information
The PXF processor is turned on by default. If it is ever disabled, you must enable it to take advantage of
IP packet switching and feature acceleration.
Note
The VPN Acceleration Module (VAM) is not compatible with the PXF processor.
Note
Before enabling the PXF processor, you must have IP routing and IP CEF switching turned on.
To manually disable or enable the PXF processor, use the global commands:
hostname (config)# [no] ip pxf
The following features are supported by the PXF processor and are enabled using standard IOS
procedures:
•
CEF—Cisco Express Forwarding
•
NetFlow
•
NAT—Network Address Translation
•
WFQ—weighted fair queuing
•
WRED—weighted random early detection
•
ACL—access control list
•
CBWRED—class-based weighted random early detection
•
CBWFQ—class-based weighted fair queueing
•
CAR—committed access rate
See the
“Related Documentation” section on page xvii
to find documents about enabling these features.
Using show Commands
Use the global show version or show c7400 commands to obtain information about the hardware and
software installed on your router. Examples of each follow.
