manualshive.com logo in svg

Cisco 6921 - Unified IP Phone Standard VoIP, Administration Manual, Page: 65 / 162

Share
Download
Cisco 6921 - Unified IP Phone Standard VoIP Administration Manual Download Page 65

 

4-7

Cisco Unified IP Phone 6921, 6941, and 6961 Administration Guide for Cisco Unified Communications Manager 7.1 (SCCP)

OL-19025-01

Chapter 4      Configuring Settings on the Cisco Unified IP Phone

    IPv4 Setup Menu Options

Related Topics

  •

Displaying a Configuration Menu, page 4-2

  •

Unlocking and Locking Options, page 4-3

  •

Editing Values, page 4-3

Alternate TFTP

Indicates whether the phone is using an alternative TFTP 
server.

Scroll to the Alternate TFTP option 
and press the 

Yes 

softkey if the phone 

should use an alternative TFTP 
server; press the 

No

 softkey if the 

phone should not use an alternative 
TFTP server. 

TFTP Server 1

Primary Trivial File Transfer Protocol (TFTP) server used 
by the phone. If you are not using DHCP in your network 
and you want to change this server, you must use the TFTP 
Server 1 option.

If you set the Alternate TFTP option to yes, you must enter 
a non-zero value for the TFTP Server 1 option.

1.

If DHCP is enabled, set the 
Alternate TFTP option to 

Yes

.

2.

Scroll to the TFTP Server 1 
option, press the 

Edit

 softkey, 

and then enter a new TFTP 
server IP address.

3.

Press the 

Apply

 softkey, then 

press 

Save

.

TFTP Server 2

Optional backup TFTP server that the phone uses if the 
primary TFTP server is unavailable.

1.

Enter an IP address for the TFTP 
Server 1 option.

2.

Scroll to the TFTP Server 2 
option, press the 

Edit

 softkey, 

and then enter a new backup 
TFTP server IP address.

3.

Press the 

Apply

 softkey, then 

press 

Save

.

DHCP Address 
Released

Releases the

 

IP address assigned by DHCP.

Scroll to the DHCP Address 
Released option and press the 

Edit

 

softkey, then press the 

Yes

 softkey to 

release the DHCP Address.

Table 4-2

IPv4 Setup Menu Options (continued)

Option

Description

To Change

Summary of Contents for 6921 - Unified IP Phone Standard VoIP



































































































































































Reviews:

No comments