manualshive.com logo in svg

Cisco 6921 - Unified IP Phone Standard VoIP, Administration Manual, Page: 100 / 162

Share
Download
Cisco 6921 - Unified IP Phone Standard VoIP Administration Manual Download Page 100

 

7-6

Cisco Unified IP Phone 6921, 6941, and 6961 Administration Guide for Cisco Unified Communications Manager 7.1 (SCCP)

OL-19025-01

Chapter 7      Viewing Model Information, Status, and Statistics on the Cisco Unified IP Phone

    Status Menu

Network Statistics Screen

The Network Statistics screen displays information about the phone and network performance. 

Table 7-3

 

describes the information that appears in this screen.

To display the Network Statistics screen, follow these steps:

Procedure

Step 1

Press the 

Applications

 button.

Step 2

Select 

Admin Settings.

Step 3

Select 

Status.

Step 4

Select 

Status > Network Statistics.

To reset the Rx Frames, Tx Frames, and Rx Broadcasts statistics to 0, press the 

Clear

 softkey.

To exit the Network Statistics screen, press the 

Back

 softkey.

TFTP timeout

TFTP server did not respond.

  •

Network is busy—The errors should resolve 
themselves when the network load reduces. 

  •

No network connectivity between the TFTP 
server and the phone—Verify the network 
connections.

  •

TFTP server is down—Check configuration of 
TFTP server. 

Timed Out

Supplicant attempted 802.1X transaction 
but timed out to due the absence of an 
authenticator.

Authentication typically times out if 802.1X is not 
configured on the switch.

Version error

The name of the phone load file is 
incorrect.

Make sure that the phone load file has the correct 
name.

XmlDefault.cnf.xml, or 
.cnf.xml corresponding to 
the phone device name

Name of the configuration file.

None. This is an informational message indicating the 
name of the configuration file for the phone.

Table 7-2

Status Messages on the Cisco Unified IP Phone 6900 Series (continued)

Message

Description

Possible Explanation and Action

Table 7-3

Network Statistics Message Information for the Cisco Unified IP Phone 6900 Series 

Item

Description

Tx Frames

Number of packets sent by the phone

Tx Broadcasts

Number of broadcast packets sent by the phone

Tx Unicast

Total number of unicast packets transmitted by the phone

Rx Frames

Number of packets received by the phone

Rx Broadcasts

Number of broadcast packets received by the phone

Summary of Contents for 6921 - Unified IP Phone Standard VoIP



































































































































































Reviews:

No comments