manualshive.com logo in svg

Cisco 6921 - Unified IP Phone Standard VoIP, Administration Manual, Page: 64 / 162

Share
Download
Cisco 6921 - Unified IP Phone Standard VoIP Administration Manual Download Page 64

 

4-6

Cisco Unified IP Phone 6921, 6941, and 6961 Administration Guide for Cisco Unified Communications Manager 7.1 (SCCP)

OL-19025-01

Chapter 4      Configuring Settings on the Cisco Unified IP Phone

    IPv4 Setup Menu Options

IPv4 Setup Menu Options

The IPv4 Setup menu is a submenu of the Network Setup menu. To reach the IPv4 Setup menu, select 
the IPv4 option on the Network Setup menu.

Table 4-2

 describes the IPv4 Setup menu options.

For information about the keys you can use to edit options, see the 

“Editing Values” section on page 4-3

.

Table 4-2

IPv4 Setup Menu Options 

Option

Description

To Change

DHCP

Indicates whether the phone has DHCP enabled or 
disabled.

When DHCP is enabled, the DHCP server assigns the 
phone an IPaddress. When DHCP is disabled, the 
administrator must manually assign an IP address to the 
phone.

Scroll to the DHCP option, press the 

Edit

 softkey, then press either the 

No

 

softkey to disable DHCP, or press the 

Yes

 softkey to enable DHCP.

IP Address

Internet Protocol (IP) address of the phone.

If you assign an IP address with this option, you must also 
assign a subnet mask and default router. See the Subnet 
Mask and Default Router options in this table.

1.

Set the DHCP option to 

No

.

2.

Scroll to the IP Address option, 
press the 

Edit

 softkey, and then 

enter a new IP Address.

3.

Press the 

Apply

 softkey, then 

press 

Save

.

Subnet Mask 

Subnet mask used by the phone.

1.

Set the DHCP Enabled option to 
No.

2.

Scroll to the Subnet Mask 
option, press the 

Edit

 softkey, 

and then enter a new subnet 
mask.

3.

Press the 

Apply

 softkey, then 

press 

Save

.

Default Router 1

Default router used by the phone (Default Router 1).

1.

Set the DHCP Enabled option to 
No.

2.

Scroll to the appropriate Default 
Router option, press the 

Edit

 

softkey, and then enter a new 
router IP address.

3.

Press the 

Apply

 softkey, then 

press 

Save

.

DNS Server 1

Primary Domain Name System (DNS) server (DNS Server 
1) and optional backup DNS servers (DNS Server 2–5) 
used by the phone.

1.

Set the DHCP Enabled option to 
No.

2.

Scroll to the appropriate DNS 
Server option, press the 

Edit

 

softkey, and then enter a new 
DNS server IP address.

3.

Press the 

Apply

 softkey, then 

press 

Save

.

Summary of Contents for 6921 - Unified IP Phone Standard VoIP



































































































































































Reviews:

No comments