Purpose
Command or Action
Uncommitted changes found, commit them before
•
commit
Example:
exiting(yes/no/cancel)?
[cancel]:
RP/0/RP0/CPU0:router(config-subif)# end
•
• Entering
yes
saves configuration changes to the
running configuration file, exits the configuration
Example:
session, and returns the router to XR EXEC
mode.
Example:
RP/0/RP0/CPU0:router(config-subif)# commit
• Entering
no
exits the configuration session and
returns the router to XR EXEC mode without
committing the configuration changes.
• Entering
cancel
leaves the router in the current
configuration session without exiting or
committing the configuration changes.
• Use the commit command to save the configuration
changes to the running configuration file and remain
within the configuration session.
Exits interface configuration mode.
exit
Example:
Step 15
RP/0/RP0/CPU0:router(config-subif)# end
Exits XR configuration mode.
exit
Example:
Step 16
RP/0/RP0/CPU0:router(config)# exit
Enters XR configuration mode.
configure
Example:
Step 17
RP/0/RP0/CPU0:router # configure
Enters interface configuration mode for the Ethernet
interface you want to add to the Bundle.
interface
{
TenGigE
} interface-path-id
Example:
Step 18
Enter the
TenGigE
keyword to specify the interface type.
Replace the
interface-path-id
argument with the node-id
in the rack/slot/module format.
RP/0/RP0/CPU0:router(config)# interface
GigabitEthernet 1/0/0/0
A VLAN bundle is not active until you add an
Ethernet interface on both ends of the link
bundle.
Note
Adds an Ethernet interface to the bundle you configured
in Step 2 through Step 13.
bundle id bundle-id
[
mode
{
active
|
on
|
passive
}]
Example:
Step 19
To enable active or passive LACP on the bundle, include
the optional
mode active
or
mode passive
keywords in
the command string.
RP/0/RP0/CPU0:router(config-if)# bundle-id 3
Interface and Hardware Component Configuration Guide for Cisco NCS 6000 Series Routers, IOS XR Release 6.4.x
82
Configuring Link Bundling
Configuring VLAN Bundles