Purpose
Command or Action
RP/0/RP0/CPU0:router(config-if)# bundle
minimum-active bandwidth 580000
(Optional) Sets the number of active links required before
you can bring up a specific bundle.
bundle minimum-active links links
Example:
Step 5
RP/0/RP0/CPU0:router(config-if)# bundle
minimum-active links 2
(Optional) Implements 1:1 link protection for the bundle,
which causes the highest-priority link in the bundle to
bundle maximum-active links links
[
hot-standby
]
Example:
Step 6
become active and the second-highest-priority link to
RP/0/RP0/CPU0:router(config-if)# bundle
maximum-active links 1 hot-standby
become the standby. Also, specifies that a switchover
between active and standby LACP-enabled links is
implemented per a proprietary optimization.
The priority of the active and standby links is
based on the value of the
bundle port-priority
command.
Note
(Optional) If you enabled 1:1 link protection (you set the
value of the
bundle maximum-active links
command to
lacp fast-switchover
Example:
Step 7
1) on a bundle with member links running LACP, you can
RP/0/RP0/CPU0:router(config-if)# lacp
fast-switchover
optionally disable the wait-while timer in the LACP state
machine. Disabling this timer causes a bundle member
link in standby mode to expedite its normal state
negotiations, thereby enabling a faster switchover from a
failed active link to the standby link.
Exits interface configuration submode for the Ethernet link
bundle.
exit
Example:
Step 8
RP/0/RP0/CPU0:router(config-if)# exit
Enters interface configuration mode for the specified
interface.
interface
{
TenGigE
} interface-path-id
Example:
Step 9
Enter the
TenGigE
keyword to specify the interface type.
Replace the
interface-path-id
argument with the node-id
in the
rack
/
slot
/
module
format.
RP/0/RP0/CPU0:router(config)# interface
GigabitEthernet 1/0/0/0
Adds the link to the specified bundle.
bundle id bundle-id
[
mode
{
active
|
on
|
passive
}]
Step 10
Example:
To enable active or passive LACP on the bundle, include
the optional
mode active
or
mode passive
keywords in
the command string.
RP/0/RP0/CPU0:router(config-if)# bundle-id 3
To add the link to the bundle without LACP support,
include the optional
mode on
keywords with the command
string.
Interface and Hardware Component Configuration Guide for Cisco NCS 6000 Series Routers, IOS XR Release 6.4.x
73
Configuring Link Bundling
Configuring Ethernet Link Bundles