Purpose
Command or Action
Example:
speed
options are or Mbps.
RP/0/RP0/CPU0:router(config-if)# speed 100
The default Management Ethernet interface
speed is autonegotiated.
Note
To return the system to the default autonegotiated
speed, use the
no speed
command.
Note
Saves configuration changes.
Do one of the following:
Step 4
•
end
• When you issue the
end
command, the system prompts
you to commit changes:
• or
•
commit
Uncommitted changes found, commit them before
Example:
exiting(yes/no/cancel)?
[cancel]:
RP/0/RP0/CPU0:router(config-if)# end
•
• Entering
yes
saves configuration changes to the
running configuration file, exits the configuration
session, and returns the router to XR EXEC mode.
Example:
RP/0/RP0/CPU0:router(config-if)# commit
• Entering
no
exits the configuration session and
returns the router to XR EXEC mode without
committing the configuration changes.
• Entering
cancel
leaves the router in the current
configuration session without exiting or
committing the configuration changes.
• Use the
commit
command to save the configuration
changes to the running configuration file and remain
within the configuration session.
Modifying the MAC Address for a Management Ethernet Interface
Perform this task to configure the MAC layer address of the Management Ethernet interfaces for the RPs.
SUMMARY STEPS
1.
configure
2.
interface MgmtEth interface-path-id
3.
mac-address
address
4.
Do one of the following:
•
end
• or
•
commit
Interface and Hardware Component Configuration Guide for Cisco NCS 6000 Series Routers, IOS XR Release 6.4.x
17
Advanced Configuration and Modification of the Management Ethernet Interface
Modifying the MAC Address for a Management Ethernet Interface