2-11
Cisco Unified SIP Phone 3951 Administration Guide for Cisco Unified CallManager 5.1
OL-10969-01
Chapter 2 Preparing to Install the Cisco Unified IP Phone on Your Network
Adding Phones to the Cisco Unified CallManager Database
In some cases, you might not want to use auto-registration: for example, if you
want to assign a specific directory number to the phone. For information about
enabling auto-registration, refer to “Auto-Registration Configuration” in the
Cisco Unified CallManager Administration Guide.
Related Topics
•
Adding Phones with Cisco Unified CallManager Administration, page 2-11
•
Adding Phones with BAT, page 2-11
Adding Phones with Cisco Unified CallManager Administration
You can add phones individually to the Cisco Unified CallManager database
using Cisco Unified CallManager Administration. To do so, you first need to
obtain the MAC address for each phone.
For information about determining a MAC address, see the
“Determining the
MAC Address for a Cisco Unified IP Phone” section on page 2-12
.
After you have collected MAC addresses, in Cisco Unified CallManager
Administration, choose
Device > Phone
and click
Add New
to begin adding
phones to the Cisco Unified CallManager database.
For complete instructions and conceptual information about Cisco Unified
CallManager, refer to
Cisco Unified CallManager Administration Guide
and to
Cisco Unified CallManager System Guide
.
Related Topics
•
Adding Phones with Auto-Registration, page 2-10
•
Adding Phones with BAT, page 2-11
Adding Phones with BAT
Cisco Unified CallManager Bulk Administration (BAT) is a web-based
application that enables you to perform bulk transactions, including registering,
multiple phones to the Cisco Unified CallManager database.
Before you can use BAT to add phones, you must obtain the MAC address for each
phone.
Summary of Contents for 3951
Page 4: ......
