manualshive.com logo in svg

Cisco 3020 - Cisco Catalyst Blade Switch, Software Configuration Manual

The HP 3020 - Cisco Catalyst Blade Switch is an advanced networking solution designed for seamless data transfer. To help you get started with this powerful device, we offer a comprehensive "Getting Started Manual" available for free download from our website. Unlock the full potential of your switch with our user-friendly manual.

Share
Download
background image

 

38-12

Cisco Catalyst Blade Switch 3020 for HP Software Configuration Guide

OL-8915-03

Chapter 38      Configuring HSRP and Enhanced Object Tracking

Configuring Enhanced Object Tracking

Configuring Enhanced Object Tracking

HSRP has a mechanism for tracking the interface line-protocol state. The enhanced object tracking 
feature separates the tracking mechanism from HSRP. It creates a separate, standalone tracking process 
that can be used by processes other than HSRP. This feature allows tracking of other objects in addition 
to the interface line-protocol state. A client process, such as HSRP, can register an interest in tracking 
objects and request notification when the tracked object changes state. Several clients can track the same 
object, and can take different actions when the object changes state. This feature increases the 
availability and speed of recovery of a router system and decreases outages and outage duration.

For more information about enhanced object tracking and the commands used to configure it, see this 
URL:

http://www.cisco.com/en/US/products/sw/iosswrel/ps1839/products_feature_guide09186a00801541be.
html

This section includes this information:

•

Understanding Enhanced Object Tracking, page 38-12

•

Configuring Enhanced Object Tracking Features, page 38-12

•

Monitoring Enhanced Object Tracking, page 38-18

Understanding Enhanced Object Tracking

Each tracked object has a unique number that is specified on the tracking command-line interface (CLI). 
Client processes use this number to track a specific object. The tracking process periodically polls the 
tracked object for value changes and sends any changes (as up or down values) to interested client 
processes, either immediately or after a specified delay. 

You can also track a combination of objects in a list by using either a weight threshold or a percentage 
threshold to measure the state of the list. You can combine objects using Boolean logic. A tracked list 
with a Boolean “AND” function requires that each object in the list be in an up state for the tracked object 
to be up. A tracked list with a Boolean “OR” function needs only one object in the list to be in the up 
state for the tracked object to be up.

Configuring Enhanced Object Tracking Features

These sections describe configuring enhanced object tracking:

•

Tracking Interface Line-Protocol or IP Routing State, page 38-13

•

Configuring a Tracked List, page 38-13

•

Configuring HSRP Object Tracking, page 38-17

•

Configuring Other Tracking Characteristics, page 38-18

Summary of Contents for 3020 - Cisco Catalyst Blade Switch

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 3020 - Cisco Catalyst Blade Switch

GE Mini Field Agent User Manual preview
Mini Field Agent
Brand: GE Pages: 87
Abus TVVR36500 User Manual preview
TVVR36500
Brand: Abus Pages: 60
Palo Alto Network M-200 Reference Manual preview
M-200
Brand: Palo Alto Network Pages: 56
National Instruments NI 5922 Calibration Procedure preview
NI 5922
Brand: National Instruments Pages: 28
National Instruments NI 9219 Getting Started preview
NI 9219
Brand: National Instruments Pages: 19
National Instruments NI 9219 Operating Instructions Manual preview
NI 9219
Brand: National Instruments Pages: 36
National Instruments NI 6711 User Manual preview
NI 6711
Brand: National Instruments Pages: 103
National Instruments NI PXI-1042 Series Installation Manual preview
NI PXI-1042 Series
Brand: National Instruments Pages: 12
National Instruments PCI-1407 Setup And Operation preview
PCI-1407
Brand: National Instruments Pages: 4
National Instruments NI 9213 Getting Started preview
NI 9213
Brand: National Instruments Pages: 11
TP-Link TD-8817 User Manual preview
TD-8817
Brand: TP-Link Pages: 73
Maxim DS5001FP Specification Sheet preview
DS5001FP
Brand: Maxim Pages: 26
NetComm 3GM1WN Quick Start Manual preview
3GM1WN
Brand: NetComm Pages: 3
ADTRAN 617600026F1 Quick Start Manual preview
617600026F1
Brand: ADTRAN Pages: 9
ForeScout CounterACT Quick Installation Manual preview
CounterACT
Brand: ForeScout Pages: 28
Digitus DN-7057 Quick Installation Manual preview
DN-7057
Brand: Digitus Pages: 8
Devolo Magic WiFi mini Ek Manual preview
Magic WiFi mini Ek
Brand: Devolo Pages: 22
ebm-papst R3G175-AF01-02 Operating Instructions Manual preview
R3G175-AF01-02
Brand: ebm-papst Pages: 11

Brands by name

Popular brands

Load more brands