1-12
Cisco Catalyst Blade Switch 3020 for HP Software Configuration Guide
OL-8915-03
Chapter 1 Overview
Default Settings After Initial Switch Configuration
•
IEEE 802.1Q tunneling and Layer 2 protocol tunneling are disabled. For more information, see
Chapter 15, “Configuring IEEE 802.1Q and Layer 2 Protocol Tunneling.”
•
STP, PVST+ is enabled on VLAN 1. For more information, see
Chapter 16, “Configuring STP.”
•
MSTP is disabled. For more information, see
Chapter 17, “Configuring MSTP.”
•
Optional spanning-tree features are disabled. For more information, see
Chapter 18, “Configuring
Optional Spanning-Tree Features.”
•
Flex Links are not configured. For more information, see
Chapter 19, “Configuring Flex Links and
the MAC Address-Table Move Update Feature.”
•
DHCP snooping is disabled. The DHCP snooping information option is enabled. For more
information, see
Chapter 20, “Configuring DHCP Features and IP Source Guard.”
•
IP source guard is disabled. For more information, see
Chapter 20, “Configuring DHCP Features
and IP Source Guard.”
•
Dynamic ARP inspection is disabled on all VLANs. For more information, see
Chapter 21,
“Configuring Dynamic ARP Inspection.”
•
IGMP snooping is enabled. No IGMP filters are applied. For more information, see
Chapter 22,
“Configuring IGMP Snooping and MVR.”
•
IGMP throttling setting is deny. For more information, see
Chapter 22, “Configuring IGMP
Snooping and MVR.”
•
The IGMP snooping querier feature is disabled. For more information, see
Chapter 22, “Configuring
IGMP Snooping and MVR.”
•
MVR is disabled. For more information, see
Chapter 22, “Configuring IGMP Snooping and MVR.”
•
Port-based traffic
–
Broadcast, multicast, and unicast storm control is disabled. For more information, see
Chapter 23, “Configuring Port-Based Traffic Control.”
–
No protected ports are defined. For more information, see
Chapter 23, “Configuring Port-Based
Traffic Control.”
–
Unicast and multicast traffic flooding is not blocked. For more information, see
Chapter 23,
“Configuring Port-Based Traffic Control.”
–
No secure ports are configured. For more information, see
Chapter 23, “Configuring Port-Based
Traffic Control.”
•
CDP is enabled. For more information, see
Chapter 24, “Configuring CDP.”
•
UDLD is disabled. For more information, see
Chapter 26, “Configuring UDLD.”
•
SPAN and RSPAN are disabled. For more information, see
Chapter 27, “Configuring SPAN and
RSPAN.”
•
RMON is disabled. For more information, see
Chapter 28, “Configuring RMON.”
•
Syslog messages are enabled and appear on the console. For more information, see
Chapter 29,
“Configuring System Message Logging.”
•
SNMP is enabled (Version 1). For more information, see
Chapter 30, “Configuring SNMP.”
•
No ACLs are configured. For more information, see
Chapter 31, “Configuring Network Security
with ACLs.”
