30-6
Cisco Catalyst Blade Switch 3020 for HP Software Configuration Guide
OL-8915-03
Chapter 30 Configuring SNMP
Configuring SNMP
Configuring SNMP
These sections contain this configuration information:
•
Default SNMP Configuration, page 30-6
•
SNMP Configuration Guidelines, page 30-6
•
Disabling the SNMP Agent, page 30-7
•
Configuring Community Strings, page 30-8
•
Configuring SNMP Groups and Users, page 30-9
•
Configuring SNMP Notifications, page 30-11
•
Setting the Agent Contact and Location Information, page 30-14
•
Limiting TFTP Servers Used Through SNMP, page 30-15
•
SNMP Examples, page 30-16
Default SNMP Configuration
Table 30-4
shows the default SNMP configuration.
SNMP Configuration Guidelines
If the switch starts and the switch startup configuration has at least one
snmp-server
global
configuration command, the SNMP agent is enabled.
An SNMP
group
is a table that maps SNMP users to SNMP views. An SNMP
user
is a member of an
SNMP group. An SNMP
host
is the recipient of an SNMP trap operation. An SNMP
engine ID
is a name
for the local or remote SNMP engine.
Table 30-4
Default SNMP Configuration
Feature
Default Setting
SNMP agent
Disabled
1
.
1.
This is the default when the switch starts and the startup configuration does not have any
snmp-server
global configuration
commands.
SNMP trap receiver
None configured.
SNMP traps
None enabled except the trap for TCP connections (
tty
).
SNMP version
If no
version
keyword is present, the default is Version 1.
SNMPv3 authentication
If no keyword is entered, the default is the
noauth
(noAuthNoPriv)
security level.
SNMP notification type
If no type is specified, all notifications are sent.
