2-13
VPN 3000 Series Concentrator Getting Started
78-15733-03
Chapter 2 Installing and Powering Up the VPN Concentrator
Beginning Quick Configuration
Quick Configuration Using Non-default Values
Although you can choose to accept the default values, where applicable, for many of the quick
configuration parameters, you can instead specify particular values for one or more of these parameters.
Table 2-2
lists the parameters you need for quick configuration and provides space for you to record the
values you enter. Write those values here now to save time as you enter data.
Table 2-2
Quick Configuration Parameters
Screen | Parameter Name
Parameter Description and Use
Your Entry
IP Interfaces | Ethernet 1 (Private)
Specify the IP address and subnet mask, speed, and duplex
mode for the VPN Concentrator interface to your private
network.
IP Interfaces | Ethernet 2 (Public)
Specify the IP address and subnet mask, speed, and duplex
mode for the VPN Concentrator interface to the public
network.
IP Interfaces | Ethernet 3 (External)
(For models 3015–3080 only)
If so connected
, specify the IP
address and subnet mask, speed, and duplex mode for the
VPN Concentrator interface to an additional external
network.
System Info | System Name
Specify a device or system name for the VPN Concentrator
(for example, VPN01).
System Info | DNS Server
Specify the IP address of your local DNS (Domain Name
System) server.
System Info | Domain
Specify the registered Internet domain name to use with
DNS (for example, cisco.com).
System Info | Default Gateway
Specify the IP address or hostname of the default gateway
for packets not otherwise routed.
Tunneling
Specify the tunneling method and encryption options you
want to enable.
Address Assignment | DHCP | Server
If you use Dynamic Host Configuration Protocol (DHCP)
for remote address assignment
, specify the IP address or
hostname of the DHCP server.
Address Assignment |
Configured Pool |
Range Start and Range End
If you use the VPN Concentrator to assign addresses,
specify the starting and ending IP addresses in its initial
configured pool.