background image

 

Catalyst 3560-C and 2960-C Switch Getting Started Guide

  

10

Catalyst 3560-C and 2960-C Switch Getting Started Guide

OL-23802-02

Cisco Network Assistant

Cisco Network Assistant is a software program that you download from 
Cisco.com and run on your PC. It offers advanced options for configuring and 
monitoring multiple devices, including switches, switch clusters, switch stacks, 
routers, and access points. Network Assistant is free—there is no charge to 
download, install, or use it.

1.

Go to this Web address: 

http://www.cisco.com/en/US/products/ps5931/index.html

You must be a registered Cisco.com user, but you need no other access 
privileges.

2.

Click the 

Download Software

 link, and select the version you want to 

download.

3.

Download the Network Assistant installer, and run it. (You can run it directly 
from the Web if your browser offers this choice.)

4.

When you run the installer, follow the displayed instructions. In the final 
panel, click 

Finish

 to complete the Network Assistant installation. 

See the Network Assistant online help and the getting started guide for more 
information.

Command-Line Interface

You can enter Cisco IOS commands and parameters through the CLI. Access the 
CLI by using one of these options:

  •

Switch RJ-45 Console Port

  •

Switch USB Mini-Type B Console Port

Summary of Contents for 2960-C

























Reviews: